The elektro polishing system Avantgarde pursues a new concept of process improvement with a reduction of the employee effort.

The cleaning machine automatically performs the sequence of the cleaning process.

After the last inspection, before packing, the product must be free of contamination of any kind to correspond to the normative microbiological requirements.This is made possible with the Final Clean.

Electro-polishing is required additionally to achieve a higher surface quality of the NiTinol stents.

The BF 208-300 sets new standards in the cost-effective production of balloons.

The Crimpmaster 3 is a programmable crimping machine for fixed crimping of stents onto balloon catheters.

The Druleck 2 is a PC-controlled pressure- and leaktester for catheters and balloons.

The Kiwi is an automatic PC-controlled tube-drilling machine. All types of tubes can be drilled with the Kiwi. Hollow drills guarantee a clean and exact drill bore.

The two axes on the Gemini enable a multitude of different applications. E.g. two-sided tapering of tubes for the manufacture of large balloons with reduced necks. Stretching of long tips and forming of graduated catheters are also possible.

The RF 200 can be used in all cases where quick and simple force measurement is required.

The Roma 3 is a rotary swaging machine for fine tubes.

The DLF 380 was developed for testing pull-off and friction forces. The tester can be used as an inline product tester and for development.

The Stent Roller is the little helper to inspect Stents under the microscopes.

The C 30 is a manual cutting machine which is designed to the exact cut of different types of tubes with the outer diameter from 1-30 mm.

The C 100 was developed for the manual cutting of different types of tubes of different lengths and diameters.

The C 200 was developed for the manual cutting of different types of tubes of different lengths and diameters.

The Cut Box is a software controlled cutting machine which is designed to the exact cut of different types of tubes with the outer diameter from 0.3-10 mm.

The AC 30 is a software controlled cutting machine which is designed to the exact cut of different types of tubes with the outer diameter from 1-30 mm.

The AC 60 is a software controlled cutting machine which is designed to the exact cut of different types of tubes with the outer diameter from 1-60 mm.

The AC 100 is a software controlled cutting machine which is designed to the exact cut of different types of tubes with the outer diameter from 1-100 mm.

The Winder is a reliable aide to cut tubes, cables and wiring.

The Winder is a reliable aide to cut tubes, cables and wiring.

The Rewinder is a reliable aide to cut tubes, cables and wiring.

Stainless Steel Spools are employed under difficult ambient conditions.

The HT 800 is an annealing furnace designed for up to approx. 900 °C.

You can rely on the fact that with the HT 1000 no foreign atoms will be installed in your products during the thermal process and that extremely fine parts are properly processed without depositing any oxide.

You can rely on the fact that with the HT 1250 no foreign atoms will be installed in your products during the thermal process and that extremely fine parts are properly processed without depositing any oxide.